Shengxiang Gear Oil

AUTOMOTIVE DRIVELINE LUBRICATION

Gear Oil Built Around Viscosity, Load & Application

Explore Shengxiang Ordinary and GL-5 gear-oil families by SAE viscosity grade, application type and commercial service positioning.

2Product families: Ordinary and GL-5

85WShared winter-grade designation

90 / 140Two high-temperature viscosity grades

100K–150KCommercial service-position range*

PRODUCT FAMILIES

Start with the right series

Use the overview as a selection aid.

Ordinary Series

Reliable everyday gear-oil options for compatible routine driveline applications.

2 Grades 85W-9085W-140 100,000 km

GL-5 Series

Premium heavy-load gear-oil range with four variants.

4 Grades 85W-9085W-140 100K–150K km

SERIES COMPARISON

Ordinary vs. GL-5

A concise commercial comparison based on the current product page.

Selection item

Ordinary Series

GL-5 Series

Listed viscosity

85W-90 / 85W-140

Performance positioning

Routine driveline; confirm TDS/OEM performance requirement

API GL-5 series positioning

Commercial service position*

100,000 km

100,000–150,000 km

Variants

Standard

Standard + White variants

HOW TO SELECT

Three checks before you order

A professional lubricant selection should start with the equipment requirement.

Confirm performance level

Check the OEM manual/TDS requirement first.

Match SAE viscosity

Choose the viscosity grade specified or permitted.

Set service interval by OEM

Actual drain interval depends on OEM instructions and duty cycle.

APPLICATION OVERVIEW

Where gear oils work

Final suitability depends on the exact OEM specification.

Gearbox / transmissionOnly where approved.

Differential / axleCheck API/LSD requirements.

Commercial drivelineDuty cycle influences selection.

Technical note: viscosity grade and performance designation are different selection dimensions.

Need a product recommendation or quotation?

Send equipment model, required specification, viscosity, quantity, packaging and destination.

Contact Sales

← Back to Series

ORDINARY GEAR OIL

Ordinary Series Product Categories

Two viscosity options with 100,000 km commercial service positioning.*

ORDINARY GEAR OIL

85W-90

100,000 km Service Position*

Balanced viscosity choice for compatible manual transmissions, gearboxes and axle applications.

SeriesOrdinary

Viscosity85W-90

Service Position100,000 km

UseCompatible routine driveline

ORDINARY GEAR OIL

85W-140

100,000 km Service Position*

Higher-viscosity choice for compatible applications requiring SAE 85W-140.

SeriesOrdinary

Viscosity85W-140

Service Position100,000 km

UseHigher-viscosity routine driveline

TECHNICAL PRODUCT GUIDE

Understand the viscosity choice

Both grades carry the 85W winter designation.

VISCOSITY COMPARISON

85W-90 vs 85W-140

Qualitative relative comparison—not a laboratory viscosity chart.

Lower relative hot viscosityHigher relative hot viscosity

85W-90

Balanced grade

85W-140

Higher hot grade

Visual scale is illustrative only.

APPLICATION DIAGRAM

Typical driveline locations

Suitability depends on the specified performance level.

GEAR

GearboxConfirm performance category + SAE grade.

AXLE

Axle / differentialConfirm gear type and OEM specification.

FLEET

Fleet drivelineDuty cycle determines the real interval.

TEMPERATURE BEHAVIOR

Conceptual viscosity-temperature view

Viscosity decreases as temperature rises.

Condition85W-9085W-140

Cold

Warm-up

Operating

High heat

Qualitative visualization only — not laboratory measurements.

85W-9085W-140Illustrative — not TDS data

SELECTION CHECK

What to confirm before filling

OEM SpecRequired performance category

SAE GradeAs specified

ComponentGearbox / axle / final drive

ServiceOEM + duty cycle

PRODUCT SPECIFICATION

Ordinary Series specification overview

Summary of currently available page information.

Item	85W-90	85W-140
Series	Ordinary	Ordinary
SAE viscosity grade	85W-90	85W-140
Performance level	Confirm product TDS / OEM requirement	Confirm product TDS / OEM requirement
Commercial service position*	100,000 km	100,000 km
Typical selection	Compatible routine driveline where 85W-90 is specified	Compatible routine driveline where 85W-140 is specified

*Commercial service positioning does not override the OEM drain interval.

Reference framework: SAE J306 viscosity classification.

ORDINARY SERIES TDS STATUS

Laboratory values will be published only from an approved Ordinary-series report

No Ordinary-series lab report was supplied, so values are not copied or invented.

Kinematic viscosity40°C / 100°C

Viscosity indexVI

Pour point°C

Flash point°C

Corrosion / rustTest result

FoamingmL/mL

Water% / result

Mechanical impurities% / result

Performance categoryVerified claim

Test methodsGB/T / ASTM / OEM

SMART PRODUCT SELECTION

Ordinary Series — Selection Guidance

Choose the lubricant from the equipment requirement first.

1OEM requirementRead the equipment specification.

2Performance categoryVerify the approved TDS.

3SAE viscosityMatch the specified grade.

4Component & dutyCheck component and severity.

5Service intervalFollow OEM maintenance policy.

Confirm the performance categoryDo not infer a GL category from viscosity alone.

Match 85W-90 or 85W-140 correctlyUse the OEM-approved viscosity grade.

Check the exact driveline componentComponent design can change lubricant requirements.

Consider load and temperatureOperating severity matters.

Treat 100,000 km as positioning, not a guaranteeOEM maintenance requirements take priority.

Verify the product-specific TDS before releaseUse current approved technical documentation.

Selection rule: OEM requirement → verified performance category → correct SAE grade → component compatibility → operating severity → maintenance interval.

Need an Ordinary Series quotation?

Send viscosity, quantity, packaging and destination.

Request Quote

← Back to Series

PREMIUM GL-5 GEAR OIL

GL-5 Series Product Categories

Four premium product options covering 85W-90 and 85W-140.

GL-5 GEAR OIL

85W-90

100,000 km Service Position*

Premium 85W-90 option for compatible differentials, final drives and gear systems.

SeriesGL-5

Viscosity85W-90

Service Position100,000 km

VariantStandard

GL-5 GEAR OIL

85W-140

150,000 km Service Position*

High-viscosity GL-5 option positioned for demanding heavy-load driveline service.

SeriesGL-5

Viscosity85W-140

Service Position150,000 km

VariantStandard

GL-5 WHITE VARIANT

85W-90 White

150,000 km Service Position*

White variant of 85W-90 with premium GL-5 positioning.

SeriesGL-5

Viscosity85W-90

Service Position150,000 km

VariantWhite

GL-5 WHITE VARIANT

85W-140 White

150,000 km Service Position*

White 85W-140 variant for customers requiring the higher viscosity grade.

SeriesGL-5

Viscosity85W-140

Service Position150,000 km

VariantWhite

GL-5 TECHNICAL GUIDE

Performance, viscosity & application

API GL-5 and SAE viscosity grade describe different aspects.

API GL-5 EXPLAINED

GL-5

High-load axle gear service

API GL-5 is intended for demanding axle gear service, particularly hypoid gears.

Hypoid gear focusShock-load conditionsHigh-torque conditions

LSD friction requirements are normally defined separately by the axle manufacturer.

VISCOSITY COMPARISON

85W-90 vs 85W-140

Both share the 85W winter designation.

Lower relative hot viscosityHigher relative hot viscosity

85W-90

Balanced grade

85W-140

Higher hot grade

Illustrative relative scale only.

APPLICATION DIAGRAM

Where GL-5 is commonly considered

The OEM remains the final authority.

DIFF

DifferentialConfirm LSD friction requirements.

HYPOID

Final drive / hypoid axleCore GL-5 area when specified.

GEAR

Selected gearboxesOnly where explicitly permitted.

TEMPERATURE BEHAVIOR

Conceptual viscosity-temperature view

Qualitative relationship only.

Condition85W-9085W-140

Cold

Warm-up

Operating

High heat

Qualitative visualization only — not laboratory measurements.

85W-9085W-140Illustrative — not TDS data

PRODUCT SPECIFICATION

GL-5 Series specification overview

Commercial page summary; add verified TDS values when available.

Item	85W-90	85W-140	85W-90 White	85W-140 White
Series	GL-5	GL-5	GL-5	GL-5
SAE viscosity grade	85W-90	85W-140	85W-90	85W-140
Performance positioning	API GL-5 series	API GL-5 series	API GL-5 series	API GL-5 series
Commercial service position*	100,000 km	150,000 km	150,000 km	150,000 km
Variant	Standard	Standard	White	White
Typical selection	GL-5 + 85W-90 specified	GL-5 + 85W-140 specified	White variant	White variant

*Commercial page positioning; verify current TDS/test documentation.

Technical reference: API Publication 1560 + SAE J306.

VERIFIED LABORATORY / INSPECTION DATA

GL-5 80W-90 measured results

Source: product inspection report. Applies to GL-5 80W-90 only.

152.3KV @ 40°Cmm²/s (cSt)

16.30KV @ 100°Cmm²/s (cSt)

113Viscosity IndexVI

−38°CPour PointMeasured

215°CFlash PointOpen cup

Measured viscosity drop with temperature

Two measured points; not a full viscosity-temperature curve.

40°C

152.3 cSt

100°C

16.30 cSt

Quality-control results

Report judgement: qualified.

AppearanceClear / transparent

WaterNone detected

Mechanical impuritiesNone detected

Copper corrosionClass 1 (100°C, 3 h)

Liquid-phase rust, Method BNo rust

Foam tendency / stability0/0 · 0/0 · 0/0 mL/mL

Test item	Quality requirement	Measured result	Method
Appearance	Clear / transparent	Clear / transparent	Visual
Kinematic viscosity @ 100°C	13.5–18.5 mm²/s	16.30 mm²/s	GB/T 265
Kinematic viscosity @ 40°C	—	152.3 mm²/s	GB/T 265
Viscosity index	—	113	GB/T 2541
Pour point	≤ −30°C	−38°C	GB/T 3535
Water, volume fraction	0.03%	None detected	GB/T 260
Mechanical impurities, mass fraction	0.02%	None detected	GB/T 511
Flash point, open cup	≥ 180°C	215°C	GB/T 3536
Copper strip corrosion, 100°C × 3 h	≤ 1	1	GB/T 5096
Liquid-phase rust test, Method B	No rust	No rust	GB/T 11143
Foam, 24°C	≤ 20/0 mL/mL	0/0	GB/T 12579
Foam, 93.5°C	≤ 50/0 mL/mL	0/0
Foam, after 24°C	≤ 20/0 mL/mL	0/0
Report judgement	—	QUALIFIED	—

Document type: Product Inspection Report; verify the latest approved document before public commercial use.

GL-5 APPLICATION CHECK

GL-5 Series — Selection Guidance

Use GL-5 only where the OEM permits the performance level and selected SAE grade.

1OEM specificationConfirm GL-5 permission.

2Gear / axle designCheck driveline design.

3SAE viscosityMatch the approved grade.

4Special requirementsCheck special requirements.

5TDS & serviceVerify data and maintenance.

Use GL-5 only where specified or permittedThe OEM performance requirement comes first.

Confirm hypoid / axle requirementsMatch the lubricant to the exact gear design.

Match the exact SAE viscosity gradeGL-5 does not replace the SAE viscosity requirement.

Check limited-slip, seals and materialsSpecial driveline systems may need additional approval.

Set the real drain interval from service conditionsOEM maintenance and operating severity control service life.

Keep laboratory data tied to the exact productUse product-specific technical documentation.

GL-5 selection rule: OEM permission → axle/gear design → exact SAE grade → special friction/material needs → product-specific TDS → OEM service interval.

Need a GL-5 Series quotation?

Send viscosity, variant, quantity, packaging and destination.

Request Quote

圣翔 (Shandong) Energy Technology

Gear Oil Built Around Viscosity, Load & Application

Start with the right series

Ordinary Series

GL-5 Series

Ordinary vs. GL-5

Three checks before you order

Confirm performance level

Match SAE viscosity

Set service interval by OEM

Where gear oils work

Need a product recommendation or quotation?

Ordinary Series Product Categories

Understand the viscosity choice

85W-90 vs 85W-140

Typical driveline locations

Conceptual viscosity-temperature view

What to confirm before filling

Ordinary Series specification overview

Laboratory values will be published only from an approved Ordinary-series report

Ordinary Series — Selection Guidance

Need an Ordinary Series quotation?

GL-5 Series Product Categories

Performance, viscosity & application

High-load axle gear service

85W-90 vs 85W-140

Where GL-5 is commonly considered

Conceptual viscosity-temperature view

GL-5 Series specification overview

GL-5 80W-90 measured results

Measured viscosity drop with temperature

Quality-control results

GL-5 Series — Selection Guidance

Need a GL-5 Series quotation?