Cutting Fluid All Models
A complete product family for aluminum alloy, stainless steel, mold steel, ferrous metals, Wire EDM, deep-hole drilling, extreme-pressure cutting and rust-prevention applications.
Four solution families for different machining needs
The page is organized around the exact product/application relationships you supplied.
Microemulsion Fluids
40AL, stainless-steel entry, 20CF and 830 cover aluminum, stainless steel, mold steel and ferrous-metal needs.
Fully Synthetic Fluids
Includes 600C for ferrous metals and a multi-material fully synthetic option.
Specialty Process Fluids
Wire EDM fluid, deep-hole drilling fluid and CUT012 extreme-pressure cutting oil cover specialized manufacturing processes.
Rust Prevention
Listed 6-, 12- and 24-month rust-preventive oils plus hard-film variants.
Identify Material
Aluminum, stainless steel, mold steel or ferrous metal.
Identify Process
General machining, EDM, deep-hole drilling or extreme-pressure cutting.
Choose Fluid Family
Microemulsion, fully synthetic, specialty or rust preventive.
Confirm Machine Needs
Check machine/OEM requirements and process conditions.
Verify TDS/SDS
Confirm concentration, pH, density, handling and compatibility before use.
Explore the range by product family
Where your source list did not provide a model code, this page shows the category name instead of inventing a code.
Four general functions in the cutting zone
Cooling
Helps carry heat away from the tool/workpiece interface during machining.
Lubrication
Supports lower friction at the cutting interface when the correct fluid is selected and applied.
Chip Transport
Fluid flow can help move chips and debris away from the active machining area.
Surface & Corrosion Support
Appropriate formulations can support workpiece and machine-surface protection, subject to approved technical data.
+ PROCESS
1–7 Series
Steel
Metals
Drilling
Select around the workpiece and process
Aluminum Alloy
40AL specifically lists 1–7 series aluminum. 830 and the multi-material fully synthetic entry also include aluminum alloy machining.
Stainless Steel
A dedicated microemulsion entry is listed for stainless steel, and 830 plus the multi-material fully synthetic entry also include stainless steel.
Mold Steel / Ferrous Metals
20CF is listed for mold steel/ferrous metals, while 600C is listed as a fully synthetic cutting fluid for ferrous metals.
Special Processes
Dedicated entries are provided for Wire EDM, deep-hole drilling and CUT012 extreme-pressure cutting oil.
A simple 6–24 month visual ladder
These bars visualize only the rust-prevention periods you supplied.
What buyers should confirm before selecting
These are general metalworking-fluid selection considerations.
For Water-Miscible Fluids
- Recommended working concentration
- Water hardness / water quality
- Refractometer factor
- Operating pH range
- Foam and corrosion behavior
For Neat Cutting Oils
- Viscosity grade
- Extreme-pressure additive package
- Flash point
- Material compatibility
- Machining severity
For Rust Preventives
- Required protection period
- Indoor / storage environment
- Film type and appearance
- Surface cleanliness before coating
- Removal requirements before next process
Every supplied model in one comparison table
| Model / Variant | Family | Application / Description | Key Identifier |
|---|---|---|---|
| 40AL | Microemulsion | Aluminum alloy machining (1–7 series aluminum) | 1–7 Series Aluminum |
| Stainless Steel Type | Microemulsion | Stainless steel | No model code supplied |
| 20CF | Microemulsion | Mold steel / ferrous metals | 20CF |
| 830 | Microemulsion | Aluminum alloy (1–7 series), stainless steel and mold steel | Multi-material |
| 600C | Fully Synthetic | Fully synthetic cutting fluid for ferrous metals | 600C |
| Multi-Material Type | Fully Synthetic | Aluminum alloy (1–7 series), stainless steel and mold steel | No model code supplied |
| Wire EDM | EDM | Wire EDM fluid | Process-specific |
| Deep Hole Drilling | Specialty | Deep hole drilling | Process-specific |
| CUT012 | Extreme Pressure | Extreme pressure cutting oil | CUT012 |
| 6M | Rust Preventive | Rust-preventive oil | 6-month prevention period |
| 12M | Rust Preventive | Rust-preventive oil | 12-month prevention period |
| 24M | Rust Preventive | Rust-preventive oil | 24-month prevention period |
| Golden Yellow | Hard Film Rust Preventive | Hard film rust preventive oil | Golden yellow variant |
| White | Hard Film Rust Preventive | Hard film rust preventive oil | White variant |
A practical four-step decision process
Start with the material
Aluminum alloy, stainless steel, mold steel or ferrous metal.
Define the process
General cutting, Wire EDM, deep-hole drilling, EP cutting or rust prevention.
Shortlist the family
Choose among microemulsion, fully synthetic, specialty-process or rust-preventive products.
Confirm approved technical data
Verify concentration, pH, density, compatibility, safety and operating instructions in the official TDS/SDS.
Need help selecting the right Cutting Fluid?
Send the workpiece material, machining process, machine type, current fluid, quantity, packaging requirement and destination for a faster recommendation.
